Black BLK-PTZ12X Installationsanleitung PDF herunterladen (Seite 91)

User Manual

Set the Image frequency as the upload frame rate. The setting range is

from 1 frame to 15 frames.

NOTE: Make sure SMTP configuration has been completed.

Please refer to 5.3.5 Mail for further details.

 PTZ Function

Assign a camera function: Preset, Sequence, Autopan or Cruise, and

specify a Preset Point/Sequence Line/ Autopan Path/Cruise Line for

the camera to perform at an alarm occurrence.

NOTE: Please refer to the sections through 5.5.1 Preset

Programming to 5.5.4 Sequence Line Programming for

details of Preset Point / Sequence Line / Autopan Path /

Cruise Line setups.

If the selected function is <Preset>, it is required to enter its dwell time

(1 ~ 256 sec.) in the corresponding field as shown below. When the

alarm is triggered, the camera will go to the selected Preset Point and

stay there for a user-defined period of time. As for other function modes,

the camera will keep executing the specified function; to stop the

performance, simply change the camera’s status.

NOTE: The dwell time is only adjustable when selecting

Preset as the alarm action. When the dwell time is up, the

network Speed Dome Camera will go back to its trigger

position and recheck alarm pin status.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 164 165

Keine Kommentare

Black BLK-PTZ12X Installationsanleitung Seite 91