
Installation Guide
12
STEP 6
Screw the dome cover and
camera body together with the
supplied M3 Standard/Security
Screw. For fastening the Security
Screw, please use the supplied
Security Torx.
STEP 7
Then tighten the two Slotted
Screws on the camera housing
as shown in the figure by turning
them counterclockwise.
STEP 8
Set the switches located on the
bottom of the Dome Camera.
Refer to section 3.2 Dome
Camera Setups for detailed
information about various switch
setting.
Kommentare zu diesen Handbüchern