Black BLK-PTZ12X Installationsanleitung PDF herunterladen (Seite 142)

User Manual

140

Freeze

Freeze function allows to hold the image while the camera is moving between

preset positions such as in Preset mode and Sequence mode. Users can

choose to activate or disable the function. Click on <Set> to save the setting.

Flip

Users can track an object continuously when it passes through under the Dome

Camera with setting Flip to Mechanical (M.E.) mode or Digital Flip (Image)

mode.

NOTE: Flip setting is manual-controlled only. If a Preset Position or a

point for other function (ex. Sequence) is set in the position that can

only be reached through FLIP motion, when Flip function is turned off,

the position cannot be reached anymore.

NOTE: To make the Dome Camera tilt between a specific range, such

as -10 to +100° or -10° ~ +190°, please go to the <Tilt Range> setting

page to set the tilt angle range. Otherwise, the Dome Camera will tilt

90° as the default setting.

 M.E. Mode

M.E. is a standard mechanical operation. As the Dome Camera tilts to

the maximum angle, it will pan 180°, and then continue tilting to keep

tracking objects.

 Image Mode

IMAGE represents digital IMAGE FLIP, which enables users to keep

tracking objects seamlessly; under the mode, almost no delay occurs in

comparing with that under the M.E. mode.

NOTE: The Privacy Mask function will be automatically

disabled if the Image Flip function is enabled.

Digital Zoom

The network Speed Dome Camera can supports up to 12× Digital Zoom. Click

on <Set> to save the setting.

ICR Function

With the IR cut filter, the camera can still catch clear image at night time or in low

light conditions.

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 164 165

Keine Kommentare

Black BLK-PTZ12X Installationsanleitung Seite 142