Black BLK-IPD105M Spezifikationen PDF herunterladen (Seite 8)

www.digiop.com

SECTION 2: INSTALLATION AND SETUP

At a computer on the same LAN (subnet) where your cameras will be installed, do the following:

1. Insert the CD mini disk provided with your camera into your computer’s CD ROM drive and open the CD in a Windows

Explorer window.

2. Find the IPAdminTool directory on the CD.

3. Copy the IPAdminTool directory with its contents to your computer hard drive.

1.1.2 Installing cameras and encoders on networks with DHCP

In networks with a DHCP server, the IP camera will acquire dynamic (changeable) network settings when it is initially powered on.

These dynamic settings can easily be converted to static settings, or changed to other static settings that are also compatible with

your network.

1. Find the product label on your camera or encoder and record MAC address for future reference:

MAC address ____________________

2. Connect your IP camera or encoder to the LAN, then power on the camera.

3. Open the IPAdminTool directory on your computer, then double click the le IPAdminTool.exe to start the application.

When the IPAdmin Tool starts, it will discover all the IP devices it supports that exist on the network. The discovery process

may take a few minutes.

Check the list of IP devices found by IPAdmin Tool. You can identify your camera by the MAC address. If the camera was not

found, click Refresh once every minute until your camera appears in the list.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 97 98

Keine Kommentare

Black BLK-IPD105M Spezifikationen Seite 8