
46
www.digiop.com
SECTION 3: SETUP CONFIGURATION
Enable RTSP Authentication
To use authentication for RTSP streaming, select Enable RTSP Authentication and select the Authentication Type and Privilege.
Authentication types:
• Basic: Use simple encryption of ID and PW with clear text.
• Digest: Use enhanced encryption. Refer to RFC2617 - HTTP Authentication: Basic and Digest Access Authentication for
additional information.
Privilege: Select an option from the dropdown list.
RTSP conguration for MULTICAST
RTSP can be congured for MULTICAST or UNICAST. Click the tab on the selection bar to choose the operational mode. In Multicast
mode, the 1st stream and 2nd stream can be congured dierently.
Click Enable RTP session to use this feature.
RTP Conguration - First Stream and Second Stream
IP Address: Enter a specic IP address for streaming, or use “0.0.0.0” to allow the router to determine the IP address.
NOTE
UDP/RTP multicast is not allowed for streaming.
How auto conguration of an IP address works
Since the session name for each RTP session is dened on the server, your PC can receive the stream by going to “rtsp://<rtsp
server ipaddress>:<port>/<rtp session name>”.
Port: Set the port number used for the router to receive the streaming data from the product. “18888” is set for video data of 1st
stream and “28888” is for video data of 2nd stream.
TTL: Set the TTL (Time to Live) value. If TTL = 1, the packet will pass 1 subnet (router).
What is TTL?
TTL can be dened as the maximum number of routers a data packet is allowed to pass though on the path to its destination
before it is discarded. If data packets sent from the encoder across the network live permanently on a network, a high
network load can occur.
Packet Size: Select the packet size in consideration of your network bandwidth. The factory default is 1500 bytes.
Kommentare zu diesen Handbüchern