Black BLK-IPD105M Spezifikationen PDF herunterladen (Seite 41)

35IP Camera and Encoder Software Manual

SECTION 3: SETUP CONFIGURATION

IP Address Conguration

Obtain an IP address via DHCP: For DHCP to serve an IP address to the device, check the DHCP option and the click Apply.

When changing your IP address, the following messages may appear. These messages warn that the DHCP server may fail to issue a

new IP address. If this occurs, the last static IP address is applied. Click OK to accept the notication.

When trying to acquire a DHCP served IP address, the following warning may occur. Click Cancel to avoid this conguration

problem.

Manual IP conguration

To use the device with the static IP address, enable the ‘Use the following IP addresses’ and click Apply.

— IP address: The IP address of your device.

— Subnet mask: The address of subnet mask of your device.

— Gateway address: The gateway address of your device.

— Broadcast address: The Broadcast address is automatically xed by the subnet mask and the IP address. For

example, if you use a class B (255.255.0.0) subnet mask, the broadcast address will be 192.168.255.255.

test: The test (“ping”) button shows if the IP address entered is in use or not. If the IP address is in use, do not assign this address to

the device. The test program may take a few minutes to complete.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 97 98

Keine Kommentare

Black BLK-IPD105M Spezifikationen Seite 41