Black BLK-IPS103 Bedienungsanleitung PDF herunterladen (Seite 20)

www.digiop.com

SECTION 2: INSTALLATION AND SETUP

d. Click SETUP. A Login window will open.

5. In the Login window, enter the ID and PW (password) for your camera, then click Login. The default administrator ID and

PW are root and pass. After entering the ID and PW, the IP Setup window closes.

6. In the IPAdmin Tool window, click Refresh and verify that the entry representing the camera now shows the new IP address.

7. In the IPAdmin Tool window, click Refresh and verify that the entry for your camera now shows the new IP address.

2.7 Setup the camera Basic Conguration

In this procedure, use Microsoft Internet Explorer® (IE) browser to setup the camera administrator and user passwords, date, and

time.

1. Open the IE browser.

2. In the URL eld (Internet address), enter the IP address for your camera in the format:

http://<IP address>/

where <IP address> is the IP address of your camera. Following the example earlier in this guide, the entry would be:

http://192.168.1.201

3. If prompted to install an ActiveX control such as AxNVC.cab, follow screen prompts to install the software.

IE prompt to install ActiveX control

NOTE

To load these ActiveX controls, you may need to adjust the security settings of your browser to accept add-ins from

unknown publishers.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Keine Kommentare

Black BLK-IPS103 Bedienungsanleitung Seite 20