Black BLK-IPS103 Bedienungsanleitung PDF herunterladen (Seite 15)

13H.264 Network IP Camera User Manual

SECTION 2: INSTALLATION AND SETUP

4. In the IP Setup window, click the Static option bullet to select this option.

Static

Option

If you have other compatible, network settings you want to apply to the device, enter them in the appropriate locations. Click

Setup to save settings.

5. In the Login window, enter the ID and PW (password) for your camera and click Login. The default administrator values for

the ID and PW are root and pass. After entering ID and PW, the IP Setup window closes.

6. In the IPAdmin Tool window, click Refresh and verify that the entry representing the camera now shows the new IP address.

7. Continue with procedure 2.7 Setup camera Basic Conguration.

2.6.2 Conguring cameras on networks without DHCP

NOTE

The following procedure works with most networks. For further assistance, contact Technical Support.

Cameras installed on a network without a DHCP server will initially use the factory default static network settings:

IP address: 192.168.0.100

Subnet mask: 255.255.255.0

Gateway: 192.168.0.1

In networks without a DHCP server, cameras must be powered on and recongured one at a time to avoid addressing conicts

between other cameras, or possibly with another device on the network. Conguring the network settings of your cameras includes

these steps:

— Determine the network settings of your computer.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Keine Kommentare

Black BLK-IPS103 Bedienungsanleitung Seite 15