Black 8 Channel DVR Spezifikationen PDF herunterladen (Seite 27)

Remember: After making changes to the settings press/click the APPLY button.

Buzzer: Whether the internal alarm speaker inside the DVR is enabled

or not. When set to OFF, the buzzer will not sound under any

circumstances.

You can choose which types of alarm events will trigger the buzzer

by selecting or deselecting the  rst tick box next to the type of

alarm event you want to trigger the buzzer.

We suggest leaving the buzzer enabled, and having it sound on

HDD Loss, HDD Space and Video Loss alarm events. This way, the

DVR will give you a warning if its operation is compromised (either

it is unable to record more footage, or there is no incoming video

feed to record).

MD Alarm: Whether the DVR’s Motion Detection function will trigger an alarm

event. Note that this can be set independently of the Motion-based

recording, which is controlled via the Schedule (page 25) and

motion detection con guration (page 27) menus.

HDD Loss: Will trigger an buzzer/email if the hard drive stops functioning.

HDD Space: Will trigger an buzzer/email when the hard drive is out of space.

Video Loss: Will trigger an buzzer/email when a camera stops supplying

images.

Email: See “Auto Email Setup Menu” on page 49.

Post-Recording: How long the DVR will continue to record after an alarm event

(such as motion) occurs.

Pre-Record: Allows the DVR to save a short amount of footage taken before

an event actually occurs. This can be particularly useful for video

loss alarms, as you might just catch who or what caused this alarm

event!

Remember: After making changes to the settings press/click the APPLY button.

In this example image, the CH1 will record only ALARM events between midnight and

3:00AM, CONSTANTLY between 3:00AM and 6:00AM, then continue to alternate be-

tween alarm events and constantly recording for the remainder of the day.

The DVR schedule can be set to record using three di erent record modes.

ALARM: Will record only when the alarm function has been triggered. This

is the setting to choose if you want to record only when the DVR

detects motion (recommended). By only recording when motion is

detected, you’ll not only save a great deal of hard drive space, you

won’t have to watch hours and hours of footage to locate the one

incident you’re interested in.

NORMAL: Will record constantly for the duration speci ed. This is a great

way to make sure you don’t miss anything in the short term, but

will use up your hard drive space faster than you can say “record

everything”.

Of course, there are some times that recording everything is

necessary - when you’re using a PTZ system in cruise mode, for

example.

Be aware that when you are constantly recording all eight channels,

the DVR will only be able to record for a few days to weeks at a time

(depending on the quality, framerate and resolution settings you’ve

chosen) before it will have to start overwriting old events (assuming

you have Overwrite enabled) or stop recording altogether.

The Recording Schedule

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

Black 8 Channel DVR Spezifikationen Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Videorecorder (DVR) Black 8 Channel DVR