Black BLK-CCD223VS2 Bedienungsanleitung PDF herunterladen (Seite 12)

www.digiop.com

SECTION 2: INSTALLATION

Ceiling mounting Wall mounting

4. Adjust the image with the focus and zoom levers.

5. Congure your camera using the software menus in the OSD. See Software Setup in the following section of this manual.

6. Place the dome cover over the base and adjust the dome window. Tighten the captive screws that secure the cover to the

base.

7. Clean the camera dome with an approved glass cleaning solution and a lint free cloth.

— Dust can be removed from the unit by wiping it with a soft damp cloth. To remove stains, gently rub the surface with

a soft cloth moistened with a mild detergent solution, then rinse and dry it with a soft cloth.

— Remove all foreign particles, such as plastic or rubber materials, attached to the camera housing. These may cause

damage to the surface over time.

CAUTION



Do not use benzene, thinner or other chemical products on the camera assembly; these may dissolve the paint and

promote damage of the surfaces. Before using any chemical product, read the accompanying instructions carefully.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Keine Kommentare

Black BLK-CCD223VS2 Bedienungsanleitung Seite 12